GRS® TOOLS C-MAX CARBIDE ONGLETTE GRAVERS # 0-1-2-3-4-5 Introducing the new C-Max Onglette for jewelry work, stone setting, and general engraving. The carbide material for C-Max gravers provides a superior edge to traditional tool metals. Try one today and see the difference for yourself. C-Max Onglette gravers can be used for cutting borders, inlay work, cutting lines with varying widths, line engraving, and stone setting techniques. This graver features two flat alignment areas on the shank for quick orientation in a QC Tool Holder. The set screws on GRS QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately. C-Max Onglette Gravers use QC Tool Holder for 1/8" Round (#004-873) C-Max Carbide Onglette Gravers are supplied in the following sizes: GRS ITEM # Graver # Thickness 022-625 0 1.6 mm 022-626 1 1.8 mm 022-627 2 2.0 mm 022-628 3 2.2 mm 022-629 4 2.4 mm 022-630 5 2.6 mm About C-Max Years of development have now produced a tungsten carbide graver with the right blend of hardness and toughness for hand engraving and stone setting applications. C-Max achieves a metallurgical balance like no other carbide. For years, engravers and jewelers have used other carbide gravers that break easily or don’t hold a fine edge. Now, this frustration is gone forever, thanks to C-Max carbide. Try these tools and you’ll do better work in noticeably less time.