Introducing the new C-Max for jewelry work, stone setting, and general engraving. The carbide material for C-Max gravers provides a superior edge to traditional tool metals. Try one today and see the difference for yourself.
These tapered flat gravers feature a 1/8"-round shank and have angled sides that taper down to a flat tool bottom for precise cutting.
C-Max Carbide Tapered Flat Gravers are supplied in the following sizes (please select from drop down menu):
GRS Item # Graver Number Width x Angle
022-723 36 0.2 mm x 15°
°022-724 37 0.4 mm x 15°
022-725 38 0.6 mm x 10°
022-726 39 0.8 mm x 10°
022-727 40 1.0 mm x 10°
022-728 41 1.2 mm x 10°
022-729 42 1.4 mm x 10°
022-730 43 1.6 mm x 10°
022-731 44 1.8 mm x 10°
022-732 45 2.0 mm x 10°
About C-Max
Years of development have now produced a tungsten carbide graver with the right blend of hardness and toughness for hand engraving and stone setting applications. C-Max achieves a metallurgical balance like no other carbide. For years, engravers and jewelers have used other carbide gravers that break easily or don’t hold a fine edge. Now, this frustration is gone forever, thanks to C-Max carbide. Try these tools and you’ll do better work in noticeably less time.
Use the 1/8" Round QC Tool Holder (#004-873) with the GRS Tapered Flat Gravers.
Made in USA
Watch as master stone setter Alexander Sidorov sharpens a GRS C-Max ONGLETTE Graver and then demonstrates use in stone setting applications.
https://www.youtube.com/watch?v=TF2S1DhpDNM