UNIWELD SINGLE STAGE OXYGEN REGULATOR RUH 8210
MR Medium Duty Single Stage Regulators
Uniweld produces a rugged and dependable single stage oxygen regulator designed for low pressure outputs as used by jewelers worldwide.
It is ideally suited to fit on Oxygen tanks Q, Q1, RO, and others, while delivering precise pressure assuring oxidation free soldering.
It performed ideally for many years.
-
Machined brass body and bonnet
- Easy-to-read single scale 2" gauges
- 1-5/8" tri-layered reinforced neoprene diaphragm
- Mechanical stem type seat
- T-Handle for smooth flow adjustment
- Porous bronze inlet filter
- Fine mesh filter screen between inlet seat and body
- Pressure relief device for low pressure gauge protection only
- UL Listed
Maximum Inlet 3000PSIG
Dimensions: Depth 4-½", Width 7", Height 5-½", Weight 2-½ lb
Single Stage Regulators have pressure rise of approx. ½ psi (.5) per 100 psi drop in cylinder pressure.
Note: The standard cubic foot per hour flows are obtained with the regulator outlet full open with no restrictions - using a preset outlet pressure and with a decreasing cylinder pressure.
PSIG - pounds per sq. in. gauge SCFH - standard cu. ft. per hour.
CGA Inlet Oxygen 540
Outlet Connection "B" (RH) 9/16"-18(M)
Deliverd PSIG 5-80
Manufacrtured in USA